An air source heat pump is basically a heat pump that makes use of outside air to produce heat or even to sink heat. It can be easily found in the compressor, refrigerant and condenser system that operates to both absorbing and releasing heat. Generally, outside air that exists higher than absolute zero temperature is called a heat container. This pump transfers a portion of the heat to provide household needs like hot water and room heating.

There are three main components in an air-source heat pump, which are heat exchanger, compressor and also radiators. The heat exchanger is usually used to extract heat from the air and supply them indoor. As for the compressor, it has similar function as refrigerator but the process is reversed. In a refrigerator, the compressor is used to decrease the temperature inside the refrigerator but for this pump, it increases the temperature to produce heat. Lastly, the radiator acts as a medium that allow the heat to be transferred from the outside air into hot water tank or the heating system.

Flight Service is moving in the heat pump refrigerant through a heat pump and coil components. It becomes a refrigerant compressor in a heat pump hot fluid from the states of cold gas and vice versa. When the liquid refrigerant through the evaporator is at a low temperature, the temperature is very high and, consequently, the liquid outer changes in the national hot & # XDF; em gas . However, this process requires a certain amount of energy, or a more specific name “hidden heat”. On the other hand, if the steam of a hot gas condenser heat exchanger, air heat, they will be transmitted over the coil. When this stage is completed, the condensation of hot gas and its shape makes it back to the cold liquid.


Article Source:China Sourcing Blog

Popularity: unranked [?]